Product Description
HydroTek Muck Scupper 5.5 Nozzle
Sludge & Slurry Evacuation Tool
Length: 4.5m (15')
Inlet 1/4" QCP
Orifice #5.5
Description:
Turn your pressure washer into a sludge, slurry or water evacuation tool. Pressure energy from the spray of a pressure washer wand creates suction that pulls water, up to 87gpm, through a heavy wall discharge hose. The Hydro Tek muck scupper connects to existing ¼” pressure washer wand quick connect coupler, no other tools required.
Features:
Durable stainless steel scupper will not break, rust or corrode with heavy duty industrial use, will fit tight into corners, and can be used like a scraper to loosen muck.
Exclusive design works efficiently at an angle and performs up to 45% better than other sludge pumps.
Extract vertically up to two stories.
Extraction rate is up to 15 times the pressure washer flow rate.
Typical debris left in sump pits and troughs such as slurry and small gravel will easily flow out the discharge hose
Includes 15’ of discharge hose, other hose lengths are available.
Applications:
Flood recovery and clean up
Cleanout of car wash sump pits, settling tanks, and troughs
Drain fountains, ponds, and small pools for cleaning
This is also an alternative for a sump pump or similar to suck up sludge, mud, paint or chemicals without pump damage.
